Sun Fun Kits DALY 150 BMS Mounting Brackets.

Print using 100% infill and .8mm Nozzle

These are spacers used in V3, V4, V5 kits. These add additional shim space and can also serve as electrical insulators for kits.

Expand as needed, can be expanded to 2.0MM, 3.00MM or more simply by editing the height.

Print at 100% Infill with a .8mm Nozzle

This is a utility for pulling out cells form our kits, it is spaced for the button style terminal adapter and works wih the LF280K, LF304, and REPT 280.

Print at 100% infill and .8mm Nozzle

This is the main mounting plate for the V4 kits, it's a universal plate that works with most 204mm tall cells. Also included are the left and right cell shims (1.5mm).

Print at 100% infill with .8mm Nozzle

NOTE: You will also use this plate as a template to drill holes in the DIY barebones case.

Includes both Halves of the V5G2 plate, this is used in conjunction with the V5G1 plate to complete the mounting structure for the LF105 cells. Printing with 100% Infill, 20% support structure, and .8mm Nozzle is recommended.

These are the top mounting brackets for the SFK/JBD 150 BMS. It should also work for various clone BMS units as well.

Print at 100% infill with .8mm nozzle

This is the top mounting bracket that fits most JBD and Clones in the 100-120 AMP range. It will work with the JBD Style 100 BMS both the 4s and 8s versions

Print at 100% infill with .8mm nozzle

These are the top mounting brackets for the JK-200 BMS. You will need to print 2 of these.

Print at 100% infill with .8mm Nozzle

This is the top mounting bracket for the SFK / JBD 200 BMS. Print with 100% infill and .8mm Nozzle.

This is for the V4/V5 kits and LF280N, LF280, and LF280DK cells that have a height of 200mm, using this booster will raise the height to match the LF280K & LF304.

Print with 100% infill and .8mm Nozzle

When using the DIY case only, you'll need to add these to the bottom of the ledges to increase the mounting area for the heat inserts.

PLA will hold onto the brass or BITE into it significantly better than ABS so this is a must.

8mm tall 4mm brass inserts are recommended.

Pring at 100% infill with .8mm Nozzle

This is the Riser Plate used in the V4 kits, it basically gives about 12mm of clearance so you can mount bus bars on the kit. required to complete a V4 kit.

Fully compatible with the Dual Pole Style EVE Terminal Adapter.

NOTE: This will not work with V5 Kits.

Print at 100% infill with .8mm Nozzle

This is the riser plate that sites on top of the main plate for the V5 Battery Kits. It is the 12mm height version. Printing at 100% infill with a .8mm Nozzle is recommended.

This is a tool to help pull out cells (LF304 or LF280K) that are using the SFK High Amp Adapter.

Print Settings at 100% infill with .8mm Nozzle.

V2 Spacer designed to be used with our V2 kits (replaced by V4 kits). NOTE requires a large print bed 3d printer, and should be printed with supports, 100% infill and a .8mm nozzle.

This is the V5 4S (12v) plate for the EVE LF230 and other 230AH cell types in the same class. Designed to be printed with supports, 100% infill and a .8mm Nozzle.

This is the Bottom plate for the V4/V5 kits for the EVE LF105 Prismatic cell can be used in either 4s2P or 8s cell configurations.

Printing at 100% infill with a .8mm Nozzle is recommended.